ISOLITE Mortars

Home > Products > Insulation Firebrick > ISOLITE Mortars

Mortars

ISOLITE offers a range of Mortars designed to meet your specific requirements for material, density, and porosity levels. These mortars provide excellent fire resistance, exhibiting minimal shrinkage/expansion during drying or sintering. Moreover, they contribute significantly to enhancing construction efficiency.

Specifications

Product Name		Grains Size	Mixing Water Ratio (%)	Type of firebrick tested	Adhesion Time (min)	Modulus of Rupture after adhesion MPa (kgf/cm²)		Unit Weight (kg)	Packaging Type
Product Name		(μm)	Mixing Water Ratio (%)	Type of firebrick tested	Adhesion Time (min)	after drying at 105°C	after drying at 1000°C	Unit Weight (kg)	Packaging Type
ASW (Wet-Type)	N-10	1000 pass	–	B2	1〜3	0.39 (4)	0.69 (7)	25	Can
	N-12	〃	–	B4		0.39 (4)	0.69 (7)
	F-14	〃	–	B5		0.69 (7)	1.1 (11)
	S-150	〃	–	C1		1.8 (18)	1.8 (18)
ASD (Dry-Type)	N-10	〃	35	B2		0.59 (6)	0.98 (10)		Paper bag
	N-12	〃	34	B4		0.69 (7)	0.78 (8)
	F-14	〃	35	B5		0.79 (8)	0.89 (9)
	F-30	〃	31	LAP-165		1.2 (12)	1.4 (14)
SAS-W	(Wet-Type)	〃	–	LBK-23		0.49 (5)	0.69 (7)		Can
SAS-D	(Dry-Type)	〃	35	LBK-23		0.49 (5)	0.69 (7)		Paper bag
HAS-W	(Wet-Type)	〃	–	LBK-28		0.98 (10)	1.1 (11)		Can
HAS-D	(Dry-Type)	〃	30	LBK-28		0.79 (8)	1.2 (12)		Paper bag
MAS-W	(Wet-Type)	〃	–	ISO-COR		2.5 (26)	3.8 (39)		Can
MAS-D	(Dry-Type)	〃	27	ISO-COR		2.1 (21)	3.4 (35)		Paper bag
MAS-DS	(Dry-Type)	〃	17	BAL-99		1.1 (11)	1.4 (14)
MAS-LS	(Dry-Type)	〃	17	BAL-99M		0.78 (8)	1.4 (14)
BOARD MORTAR	(Dry-Type)	–	34	Silica Board		0.39 (4)	0.20 (2)*

*after firing at 500°C

■ Adhesion Time indicates the time required to set bricks with 2mm joints until they stop moving.

■ MAS-DS, MAS-LS are heat-set mortars, all others are air-set.

Product Name		Suitable types of firebrick	Volume estimation for joints (2mm thickness)
Product Name		Suitable types of firebrick	Standard brick (kg per 1000 pieces )	Application area (kg per 1m²)
ASW	N-10	A1, B1, B2	260〜300	5.4〜6.2
(Wet-Type)	N-12	A3, A4, B4	260〜300	5.4〜6.2
	F-14	A5, A6, B5, B6, C1, C2	250〜290	5.1〜6.0
	F-15	A7, C3	250〜290	5.1〜6.0
	S-150	C1, C2, C3	150〜200	3.1〜4.1
ASD	N-10	A1, B1, B2	180〜220	3.7〜4.5
(Dry-Type)	N-12	A3, A4, B4	180〜220	3.7〜4.5
	F-14	A5, A6, B5, B6, C1, C2	170〜210	3.5〜4.3
	F-30	LAP-165	160〜200	3.3〜4.1
SAS-W	(Wet-Type)	LBK-20, LBK-23	230〜270	4.7〜5.6
SAS-D	(Dry-Type)	LBK-20, LBK-23	150〜200	3.1〜4.1
HAS-W	(Wet-Type)	A7, LBK-26, LBK-28, LBK-30, LBK-3000, LHB	250〜290	5.1〜6.0
HAS-D	(Dry-Type)	A7, C3, LBK-26, LBK-28, LBK-30, LBK-3000, LHB	160〜200	3.3〜4.1
MAS-W	(Wet-Type)	ISO-COR	250〜290	5.1〜6.0
MAS-D	(Dry-Type)	ISO-COR	160〜200	3.3〜4.1
MAS-DS	(Dry-Type)	BAL-99, BAL-99M	230〜270	4.7〜5.6
MAS-LS	(Dry-Type)	BAL-LS	230〜270	4.7〜5.6
BOARD MORTAR	(Dry-Type)	Silica Board, Super Board	530〜570*	5.8〜6.2

*Volume required for a 3mm joint for a board sized 610 x 150 mm

■ Above estimations are for 3 out of 6 sides of the brick and do not include reserve material.

Data shown are typical values obtained in accordance with accepted test methods.
They are provided for your reference only and are subject to change without notice.